Browsing all articles tagged with preformance
Comments Off on Lexmark repairs – do it the easy way

Lexmark repairs – do it the easy way

Even though lexmark printers are a good buy and have many customers due to good quality they still have the same problem that other printers have. A repair a Lexmark printer could be an expensive history if you choose a repair company.

But there is a good thing that Lexmark printers dosent have any complicated mechanisms or functions and therefore could be easily used by anyone from novice to expert.

Some of the most common problems and possible actions for reparing a Lexmark printer is following below:
Sometimes the printer stops to respond, if thats the case check the connection to the net and powersupply, make sure that everything is connected properly.
Don´t use the printer by sharing it whit other highpower deamnding units or by connecting it whit a extensioncord.

If the printer stops printing, check the cable first of all. Some Lexmark printers stops printing if the papertray is empty  or if the output tray is full. If so then either remove paper from the output tray or add paper to the input tray, to get the printer back its fuctionally.

An unusal loading time before printing begins may be a cause of a to big file, try to break it down in smaller files to print faster and quicker.

Lexmark printer repair

Paper jam is a common problem for all kind of printers. To solve the problem just open the printer door and remove the jamed papers.

Some of the Lexmark printers have a LCD-display that show where the problem is along whit tips for solving it. So the users just need to follow the tips to start the printer cleaning

High humidity could cause a problem of irregular printing. If the problem occurs check the paper if it had absorbed moisture. If it had then move the printer somewhere else where humidity dosent make a problem.

A good way to avoid much reparing is to change the ink cartridge when the printer tells you that its low on ink, If you dont change it, it could damage the printhead by overheating the outlet jet resistors

Comments Off on How to clean Laserprinters

How to clean Laserprinters

Laserprinters are getting more and more common, since the prints get a higher quallity

If you want high grapics in images or text it is a laserprinter you should go for.
But after using the printer for a long time, it will be dirty and dust will be stacked inside it, making a cleaning once in a while will give you the good quality in prints and also save yourself money since you dont have to take help from proffesionals.

When chaning the toners you should clean your printer so the print quality dosent change.
The cleaning is a pretty simple procedure, but if you are not sure in what you are doing you should let it to proffesionals.

Lexmkar t632

How to clean the printers outside?

Cleaning the outside of the printer dosent demand that much knowledge, you just need to get a good cleaning fluid ment for plastic devices and a soft cloth.
If you dont find any good fluid you could also use water.
Before you start to clean your laserprinter, check through the manual once more since there could be specific instruktions for some printers.

Turn off the printer before you start the cleaning. Make the cloth moist whit the fluid and then carefully clean the outside of the printer. When you clean the printer make sure that no fluid enters the printer

How to manually clean the inside of the printer?

After unplugging the printer from the computer and power source, then remove the papertray and toner cartridges. Place the cartridge on a paper, then you could start clean the inside of the toner cavity whit the use of lint-free dry cloth.

Be carefull though to not touch vital parts of the printers. Remove all dirt and dust and even spilled toner and paper fragments.

When you have cleaned the rolls, then replace the toner once again
When cleaning the rollers, don´t clean the printer´s sponge rollers.

 Automatic Cleaning With Printer Software

Doubleclick on the printericon or the printer helpprogram and open the program on your laserprinter.
Another way to go is to make a print and then use options and then printer utility or similar, depending on your laserprinter.

Follow all instruktions for cleaning your laserprinter whit the help of the software.


Lexmark Toners a product whit high quality

The American manufacturer Lexmark was started in 1991 and since then been develope diffrent high quality imaging and printing machines. Lexmark was started from IBM and has been able to gain a reliable reputation during the years it has been in buisness. The company, based in Lexington, Kentucky, has been providing several printing solutions to home and businesses users of all sizes.

Lexmark is not just known for it printers, but also for its toners which has high quality, they also have Lexmark multifunctional products, business services, printing supplies and much, much more.
What Lexmark has made them known for is the technology used. It dosent matter if its the printer or toner, they use a advanced technology to get a high quality when printing.
Even the speed of the printjobs are impressive.

Share Reggad på Free Page Rank Tool Pinga Frisim
Follow us on Twitter! Follow us on Twitter!


Recent Posts